PROGRAM arpsdiff,36
!
!##################################################################
!##################################################################
!###### ######
!###### PROGRAM ARPSDIFF ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
!
!-----------------------------------------------------------------------
!
! PURPOSE:
!
! Computes difference between two ARPS history files and writes
! the difference as a similar history file.
!
! Reads in a history file produced by ARPS in any ARPS format.
!
! Parameters grdout,varout,mstout,iceout and trbout should be input
! with the same values as in the data dump subroutines in the model.
!
!-----------------------------------------------------------------------
!
!
! AUTHOR: Keith Brewster OU School of Meteorology. February 1992
!
! MODIFICATION HISTORY:
! 11 Aug 1992 (KB) changed from arps2.5 to arps3.0
! 19 May 1992 (KB) changed from arps3.0 to arps3.2
! 24 May 1992 (KB) added code to handle staggered grid
! e.g., intrpu,intrpv,intrpw calls
! 12 Oct 1993 (KB) modified storage to save memory space
! Differences are now output to interpolated arrays.
!
! 08/01/1995 (Ming Xue)
! Changed the difference to be that between two total fields.
! The output perturbation fields represent the difference in
! the total fields. The mean-state fields are not changed.
!
! 09/07/1995 (KB)
! Added differencing and writing of surface (soil) fields.
! This change affects the input file.
!
! 09/12/1995 (KB)
! Cleared some bugs and restored some diagnostic printing.
!
! 03/13/1996 (Ming Xue)
! Added array tke, atke, vtke. Change km to kmh and kmv.
!
! 04/02/1996 (Keith Brewster)
! New runname is now read-in instead of output file names.
! File names are constructed from runname just as in arps.
!
! 04/30/1996 (Keith Brewster)
! Upgraded interpolation to n-order (1-to-fourth) polynomial
! based on Gauss forward method. Required some reorganization
! to use the routine efficiently. Added "iorder" as input
! variable.
!
! 11/07/1996 (Keith Brewster)
! Modified code for new interpolation scheme.
!
! 12/16/1996 (Yuhe Liu)
! Corrected the dimension definitions for all verification of soil
! and vegetation variables. They should be (vnx,vny) instead of
! (nx,ny).
!
! 04/23/1998 (Yvette Richardson)
! Corrected a bug affecting results when fdx.ne.fdy when
! calculating fy0.
!
! 12/14/1998 (Donghai Wang)
! Added the snow cover.
!
! 10/15/1999 (KB via Eric Kemp)
! Corrected dimension statement of vxs and vys. Affects only
! calculation of vxs(vnx) and vys(vny).
!
! 11/03/1999 (KB via Eric Kemp)
! Corrected dimension of snow cover and sfc flux variables
! that had recently been added.
!
! 7 May 2002 (Eric Kemp)
! Added allocation for array lon, and set nstyp = nstyps to
! correctly read in soil data. Also, added code to skip interpolation
! when both grids are identical.
!
!-----------------------------------------------------------------------
!
! DATA ARRAYS READ IN:
!
! x x coordinate of grid points in physical/comp. space (m)
! y y coordinate of grid points in physical/comp. space (m)
! z z coordinate of grid points in computational space (m)
! zp z coordinate of grid points in physical space (m)
!
! u x component of velocity (m/s)
! v y component of velocity (m/s)
! w vertical component of velocity in Cartesian
! coordinates (m/s).
!
! ptprt perturbation potential temperature (K)
! pprt perturbation pressure (Pascal)
!
! qv water vapor mixing ratio (kg/kg)
! qc Cloud water mixing ratio (kg/kg)
! qr Rainwater mixing ratio (kg/kg)
! qi Cloud ice mixing ratio (kg/kg)
! qs Snow mixing ratio (kg/kg)
! qh Hail mixing ratio (kg/kg)
!
! ubar Base state x velocity component (m/s)
! vbar Base state y velocity component (m/s)
! wbar Base state z velocity component (m/s)
! ptbar Base state potential temperature (K)
! pbar Base state pressure (Pascal)
! rhobar Base state density (kg/m**3)
! qvbar Base state water vapor mixing ratio (kg/kg)
!
! soiltyp Soil type
! vegtyp Vegetation type
! lai Leaf Area Index
! roufns Surface roughness
! veg Vegetation fraction
!
! tsfc Temperature at surface (K)
! tsoil Deep soil temperature (K)
! wetsfc Surface soil moisture
! wetdp Deep soil moisture
! wetcanp Canopy water amount
!
! raing Grid supersaturation rain
! rainc Cumulus convective rain
! prcrate Precipitation rates
!
! radfrc Radiation forcing (K/s)
! radsw Solar radiation reaching the surface
! rnflx Net radiation flux absorbed by surface
!
! usflx Surface flux of u-momentum (kg/(m*s**2))
! vsflx Surface flux of v-momentum (kg/(m*s**2))
! ptsflx Surface heat flux (K*kg/(m**2 * s ))
! qvsflx Surface moisture flux of (kg/(m**2 * s))
!
! CALCULATED DATA ARRAYS:
!
! uprt perturbation x component of velocity (m/s)
! vprt perturbation y component of velocity (m/s)
! wprt perturbation z component of velocity (m/s)
!
! WORK ARRAYS:
!
! tem1 Temporary work array.
! tem2 Temporary work array.
!
!-----------------------------------------------------------------------
!
! Variable Declarations:
!
!-----------------------------------------------------------------------
!
IMPLICIT NONE
INTEGER :: nx ! Number of grid points in the x-direction
INTEGER :: ny ! Number of grid points in the y-direction
INTEGER :: nz ! Number of grid points in the z-direction
!
!-----------------------------------------------------------------------
!
! Include files:
!
!-----------------------------------------------------------------------
!
INCLUDE 'globcst.inc'
INCLUDE 'grid.inc'
!
!-----------------------------------------------------------------------
!
! Arrays to be read in:
!
!-----------------------------------------------------------------------
!
INTEGER :: nstyps ! Maximum number of soil types in each
! grid box
PARAMETER (nstyps=4)
REAL, ALLOCATABLE :: x (:) ! The x-coord. of the physical and
! computational grid. Defined at u-point.
REAL, ALLOCATABLE :: y (:) ! The y-coord. of the physical and
! computational grid. Defined at v-point.
REAL, ALLOCATABLE :: z (:) ! The z-coord. of the computational grid.
! Defined at w-point on the staggered grid.
REAL, ALLOCATABLE :: zp (:,:,:) ! The physical height coordinate defined at
! w-point of the staggered grid.
REAL, ALLOCATABLE :: j1 (:,:,:) ! Coordinate transformation Jacobian defined
! as - d( zp )/d( x )
REAL, ALLOCATABLE :: j2 (:,:,:) ! Coordinate transformation Jacobian defined
! as - d( zp )/d( y )
REAL, ALLOCATABLE :: j3 (:,:,:) ! Coordinate transformation Jacobian defined
! as d( zp )/d( z )
REAL, ALLOCATABLE :: hterain(:,:) ! Terrain height.
REAL, ALLOCATABLE :: uprt (:,:,:) ! Perturbation u-velocity (m/s)
REAL, ALLOCATABLE :: vprt (:,:,:) ! Perturbation v-velocity (m/s)
REAL, ALLOCATABLE :: wprt (:,:,:) ! Perturbation w-velocity (m/s)
REAL, ALLOCATABLE :: ptprt (:,:,:) ! Perturbation potential temperature (K)
REAL, ALLOCATABLE :: pprt (:,:,:) ! Perturbation pressure (Pascal)
REAL, ALLOCATABLE :: qvprt (:,:,:) ! Perturbation water vapor specific humidity
REAL, ALLOCATABLE :: qc (:,:,:) ! Cloud water mixing ratio (kg/kg)
REAL, ALLOCATABLE :: qr (:,:,:) ! Rain water mixing ratio (kg/kg)
REAL, ALLOCATABLE :: qi (:,:,:) ! Cloud ice mixing ratio (kg/kg)
REAL, ALLOCATABLE :: qs (:,:,:) ! Snow mixing ratio (kg/kg)
REAL, ALLOCATABLE :: qh (:,:,:) ! Hail mixing ratio (kg/kg)
REAL, ALLOCATABLE :: tke (:,:,:) ! Turbulent Kinetic Energy ((m/s)**2)
REAL, ALLOCATABLE :: kmh (:,:,:) ! Horizontal turb. mixing coef. for
! momentum. ( m**2/s )
REAL, ALLOCATABLE :: kmv (:,:,:) ! Vertical turb. mixing coef. for
! momentum. ( m**2/s )
REAL, ALLOCATABLE :: ubar (:,:,:) ! Base state u-velocity (m/s)
REAL, ALLOCATABLE :: vbar (:,:,:) ! Base state v-velocity (m/s)
REAL, ALLOCATABLE :: wbar (:,:,:) ! Base state w-velocity (m/s)
REAL, ALLOCATABLE :: ptbar (:,:,:) ! Base state potential temperature (K)
REAL, ALLOCATABLE :: pbar (:,:,:) ! Base state pressure (Pascal)
REAL, ALLOCATABLE :: rhobar (:,:,:) ! Base state air density (kg/m**3)
REAL, ALLOCATABLE :: qvbar (:,:,:) ! Base state water vapor specific humidity
INTEGER, ALLOCATABLE :: soiltyp (:,:,:)! Soil type
REAL, ALLOCATABLE :: stypfrct(:,:,:) ! Soil type
INTEGER, ALLOCATABLE :: vegtyp (:,:) ! Vegetation type
REAL, ALLOCATABLE :: lai (:,:) ! Leaf Area Index
REAL, ALLOCATABLE :: roufns (:,:) ! Surface roughness
REAL, ALLOCATABLE :: veg (:,:) ! Vegetation fraction
REAL, ALLOCATABLE :: tsfc (:,:,:) ! Temperature at surface (K)
REAL, ALLOCATABLE :: tsoil (:,:,:) ! Deep soil temperature (K)
REAL, ALLOCATABLE :: wetsfc (:,:,:) ! Surface soil moisture
REAL, ALLOCATABLE :: wetdp (:,:,:) ! Deep soil moisture
REAL, ALLOCATABLE :: wetcanp(:,:,:) ! Canopy water amount
REAL, ALLOCATABLE :: snowdpth(:,:) ! Snow depth (m)
REAL, ALLOCATABLE :: raing (:,:) ! Cumulus convective rain
REAL, ALLOCATABLE :: rainc (:,:) ! Cumulus convective rain
REAL, ALLOCATABLE :: prcrate(:,:,:) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL, ALLOCATABLE :: radfrc(:,:,:) ! Radiation forcing (K/s)
REAL, ALLOCATABLE :: radsw (:,:) ! Solar radiation reaching the surface
REAL, ALLOCATABLE :: rnflx (:,:) ! Net radiation flux absorbed by surface
REAL, ALLOCATABLE :: usflx (:,:) ! Surface flux of u-momentum (kg/(m*s**2))
REAL, ALLOCATABLE :: vsflx (:,:) ! Surface flux of v-momentum (kg/(m*s**2))
REAL, ALLOCATABLE :: ptsflx(:,:) ! Surface heat flux (K*kg/(m*s**2))
REAL, ALLOCATABLE :: qvsflx(:,:) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Verification Arrays
!
!-----------------------------------------------------------------------
!
REAL, ALLOCATABLE :: vx (:) ! The x-coord. of the physical and
! computational grid. Defined at u-point.
REAL, ALLOCATABLE :: vy (:) ! The y-coord. of the physical and
! computational grid. Defined at v-point.
REAL, ALLOCATABLE :: vz (:) ! The z-coord. of the computational grid.
! Defined at w-point on the staggered grid.
REAL, ALLOCATABLE :: vzp (:,:,:) ! The physical height coordinate defined at
! w-point of the staggered grid.
REAL, ALLOCATABLE :: vuprt (:,:,:) ! Perturbation u-velocity (m/s)
REAL, ALLOCATABLE :: vvprt (:,:,:) ! Perturbation v-velocity (m/s)
REAL, ALLOCATABLE :: vwprt (:,:,:) ! Perturbation w-velocity (m/s)
REAL, ALLOCATABLE :: vptprt (:,:,:) ! Perturbation potential temperature (K)
REAL, ALLOCATABLE :: vpprt (:,:,:) ! Perturbation pressure (Pascal)
REAL, ALLOCATABLE :: vqvprt (:,:,:) ! Perturbation water vapor specific humidity
REAL, ALLOCATABLE :: vqc (:,:,:) ! Cloud water mixing ratio (kg/kg)
REAL, ALLOCATABLE :: vqr (:,:,:) ! Rain water mixing ratio (kg/kg)
REAL, ALLOCATABLE :: vqi (:,:,:) ! Cloud ice mixing ratio (kg/kg)
REAL, ALLOCATABLE :: vqs (:,:,:) ! Snow mixing ratio (kg/kg)
REAL, ALLOCATABLE :: vqh (:,:,:) ! Hail mixing ratio (kg/kg)
REAL, ALLOCATABLE :: vtke (:,:,:) ! Turbulent Kinetic Energy ((m/s)**2)
REAL, ALLOCATABLE :: vkmh (:,:,:) ! Horizontal turb. mixing coef. for
! momentum. ( m**2/s )
REAL, ALLOCATABLE :: vkmv (:,:,:) ! Vertical turb. mixing coef. for
! momentum. ( m**2/s )
REAL, ALLOCATABLE :: vubar (:,:,:) ! Base state u-velocity (m/s)
REAL, ALLOCATABLE :: vvbar (:,:,:) ! Base state v-velocity (m/s)
REAL, ALLOCATABLE :: vwbar (:,:,:) ! Base state w-velocity (m/s)
REAL, ALLOCATABLE :: vptbar (:,:,:) ! Base state potential temperature (K)
REAL, ALLOCATABLE :: vpbar (:,:,:) ! Base state pressure (Pascal)
REAL, ALLOCATABLE :: vrhobar(:,:,:) ! Base state air density (kg/m**3)
REAL, ALLOCATABLE :: vqvbar (:,:,:) ! Base state water vapor specific humidity
INTEGER, ALLOCATABLE :: vsoiltyp (:,:,:) ! Soil type
REAL, ALLOCATABLE :: vstypfrct(:,:,:) ! Soil type
INTEGER, ALLOCATABLE :: vvegtyp (:,:) ! Vegetation type
REAL, ALLOCATABLE :: vlai (:,:) ! Leaf Area Index
REAL, ALLOCATABLE :: vroufns (:,:) ! Surface roughness
REAL, ALLOCATABLE :: vveg (:,:) ! Vegetation fraction
REAL, ALLOCATABLE :: vtsfc (:,:,:) ! Temperature at surface (K)
REAL, ALLOCATABLE :: vtsoil (:,:,:) ! Deep soil temperature (K)
REAL, ALLOCATABLE :: vwetsfc (:,:,:) ! Surface soil moisture
REAL, ALLOCATABLE :: vwetdp (:,:,:) ! Deep soil moisture
REAL, ALLOCATABLE :: vwetcanp(:,:,:) ! Canopy water amount
REAL, ALLOCATABLE :: vsnowdpth(:,:) ! Snow depth (m)
REAL, ALLOCATABLE :: vraing(:,:) ! Grid supersaturation rain
REAL, ALLOCATABLE :: vrainc(:,:) ! Cumulus convective rain
REAL, ALLOCATABLE :: vprcrate(:,:,:) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL, ALLOCATABLE :: vradfrc(:,:,:) ! Radiation forcing (K/s)
REAL, ALLOCATABLE :: vradsw (:,:) ! Solar radiation reaching the surface
REAL, ALLOCATABLE :: vrnflx (:,:) ! Net radiation flux absorbed by surface
REAL, ALLOCATABLE :: vusflx (:,:) ! Surface flux of u-momentum (kg/(m*s**2))
REAL, ALLOCATABLE :: vvsflx (:,:) ! Surface flux of v-momentum (kg/(m*s**2))
REAL, ALLOCATABLE :: vptsflx(:,:) ! Surface heat flux (K*kg/(m*s**2))
REAL, ALLOCATABLE :: vqvsflx(:,:) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Verification data interpolated to model grid
! These arrays also hold difference fields after call to diffgr.
!
!-----------------------------------------------------------------------
!
REAL, ALLOCATABLE :: auprt (:,:,:) ! Perturbation u-velocity (m/s)
REAL, ALLOCATABLE :: avprt (:,:,:) ! Perturbation v-velocity (m/s)
REAL, ALLOCATABLE :: awprt (:,:,:) ! Perturbation w-velocity (m/s)
REAL, ALLOCATABLE :: aptprt (:,:,:) ! Perturbation potential temperature (K)
REAL, ALLOCATABLE :: apprt (:,:,:) ! Perturbation pressure (Pascal)
REAL, ALLOCATABLE :: aqvprt (:,:,:) ! Perturbation water vapor specific humidity
REAL, ALLOCATABLE :: aqc (:,:,:) ! Cloud water mixing ratio (kg/kg)
REAL, ALLOCATABLE :: aqr (:,:,:) ! Rain water mixing ratio (kg/kg)
REAL, ALLOCATABLE :: aqi (:,:,:) ! Cloud ice mixing ratio (kg/kg)
REAL, ALLOCATABLE :: aqs (:,:,:) ! Snow mixing ratio (kg/kg)
REAL, ALLOCATABLE :: aqh (:,:,:) ! Hail mixing ratio (kg/kg)
REAL, ALLOCATABLE :: atke (:,:,:) ! Turbulent Kinetic Energy ((m/s)**2)
REAL, ALLOCATABLE :: akmh (:,:,:) ! Horizontal turb. mixing coef. for
! momentum. ( m**2/s )
REAL, ALLOCATABLE :: akmv (:,:,:) ! Vertical turb. mixing coef. for
! momentum. ( m**2/s )
REAL, ALLOCATABLE :: aubar (:,:,:) ! Base state u-velocity (m/s)
REAL, ALLOCATABLE :: avbar (:,:,:) ! Base state v-velocity (m/s)
REAL, ALLOCATABLE :: awbar (:,:,:) ! Base state w-velocity (m/s)
REAL, ALLOCATABLE :: aptbar (:,:,:) ! Base state potential temperature (K)
REAL, ALLOCATABLE :: apbar (:,:,:) ! Base state pressure (Pascal)
REAL, ALLOCATABLE :: arhobar(:,:,:) ! Base state air density (kg/m**3)
REAL, ALLOCATABLE :: aqvbar (:,:,:) ! Base state water vapor specific humidity
INTEGER, ALLOCATABLE :: asoiltyp (:,:,:) ! Soil type
REAL, ALLOCATABLE :: astypfrct(:,:,:) ! Soil type
INTEGER, ALLOCATABLE :: avegtyp (:,:) ! Vegetation type
REAL, ALLOCATABLE :: alai (:,:) ! Leaf Area Index
REAL, ALLOCATABLE :: aroufns (:,:) ! Surface roughness
REAL, ALLOCATABLE :: aveg (:,:) ! Vegetation fraction
REAL, ALLOCATABLE :: atsfc (:,:,:) ! Temperature at surface (K)
REAL, ALLOCATABLE :: atsoil (:,:,:) ! Deep soil temperature (K)
REAL, ALLOCATABLE :: awetsfc (:,:,:) ! Surface soil moisture
REAL, ALLOCATABLE :: awetdp (:,:,:) ! Deep soil moisture
REAL, ALLOCATABLE :: awetcanp(:,:,:) ! Canopy water amount
REAL, ALLOCATABLE :: asnowdpth(:,:) ! Snow depth (m)
REAL, ALLOCATABLE :: araing (:,:) ! Grid supersaturation rain
REAL, ALLOCATABLE :: arainc (:,:) ! Cumulus convective rain
REAL, ALLOCATABLE :: aprcrate(:,:,:) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL, ALLOCATABLE :: aradfrc(:,:,:) ! Radiation forcing (K/s)
REAL, ALLOCATABLE :: aradsw (:,:) ! Solar radiation reaching the surface
REAL, ALLOCATABLE :: arnflx (:,:) ! Net radiation flux absorbed by surface
REAL, ALLOCATABLE :: ausflx (:,:) ! Surface flux of u-momentum (kg/(m*s**2))
REAL, ALLOCATABLE :: avsflx (:,:) ! Surface flux of v-momentum (kg/(m*s**2))
REAL, ALLOCATABLE :: aptsflx(:,:) ! Surface heat flux (K*kg/(m*s**2))
REAL, ALLOCATABLE :: aqvsflx(:,:) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Work Arrays
!
!-----------------------------------------------------------------------
!
REAL, ALLOCATABLE :: tem1(:,:,:)
REAL, ALLOCATABLE :: tem2(:,:,:)
REAL, ALLOCATABLE :: tem3(:,:,:)
REAL, ALLOCATABLE :: vtem1(:,:,:)
REAL, ALLOCATABLE :: vtem2(:,:,:)
REAL, ALLOCATABLE :: vtem3(:,:,:)
REAL, ALLOCATABLE :: xs(:)
REAL, ALLOCATABLE :: ys(:)
REAL, ALLOCATABLE :: zps(:,:,:)
REAL, ALLOCATABLE :: x2d(:,:)
REAL, ALLOCATABLE :: y2d(:,:)
REAL, ALLOCATABLE :: lat(:,:),lon(:,:)
REAL, ALLOCATABLE :: vxs(:)
REAL, ALLOCATABLE :: vys(:)
REAL, ALLOCATABLE :: vzps(:,:,:)
REAL, ALLOCATABLE :: dxfld(:)
REAL, ALLOCATABLE :: dyfld(:)
REAL, ALLOCATABLE :: rdxfld(:)
REAL, ALLOCATABLE :: rdyfld(:)
INTEGER, ALLOCATABLE :: iloc(:,:),jloc(:,:)
REAL, ALLOCATABLE :: zpver(:,:,:)
!
!-----------------------------------------------------------------------
!
! Misc. local variables
!
!-----------------------------------------------------------------------
!
CHARACTER (LEN=80) :: filename,vfilename,grdbasfn,vgrdbasfn,fcrnam,runnmin
INTEGER :: lengbf,lenfil
INTEGER :: ifproj,ivproj
REAL :: flatnot(2),vlatnot(2)
REAL :: fscale,ftrulon,fdx,fdy,fx0,fy0
REAL :: fctrlat,fctrlon
REAL :: vscale,vtrulon,vdx,vdy,vx0,vy0
REAL :: vctrlat,vctrlon
REAL :: time,xctr,yctr
INTEGER :: i,j,k
INTEGER :: grdbas
INTEGER :: iorder,hinfmt,vhinfmt
INTEGER :: ireturn
LOGICAL :: comcoord,comcoord2
INTEGER :: nch
!-----------------------------------------------------------------------
! The following defines the model dimension parameters for the
! verification data.
!-----------------------------------------------------------------------
!
INTEGER :: vnx ! Number of grid points in the x-direction
INTEGER :: vny ! Number of grid points in the y-direction
INTEGER :: vnz ! Number of grid points in the z-direction
INTEGER :: vnxy, vnxz, vnyz, vnxyz
!-----------------------------------------------------------------------
INTEGER :: istatus
!
!-----------------------------------------------------------------------
!
! namelist Declarations:
!
!-----------------------------------------------------------------------
!
NAMELIST /grid_dims/ nx,ny,nz
NAMELIST /vgrid_dims/ vnx,vny,vnz
NAMELIST /frcst_fn/ iorder, hinfmt, grdbasfn, filename
NAMELIST /vrftn_fn/ vhinfmt, vgrdbasfn, vfilename
NAMELIST /output/ runnmin, hdmpfmt, &
grdout, basout, varout, &
mstout, iceout, trbout, &
sfcout, rainout, prcout, &
radout, flxout, filcmprs
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
nstyp = nstyps ! EMK
WRITE(6,'(/6(/5x,a))') &
'###############################################################',&
'# #',&
'# Welcome to ARPSDIFF, a program that reads in history files #',&
'# generated by ARPS and produces difference grids. #',&
'# #',&
'###############################################################'
!
!-----------------------------------------------------------------------
!
! Set up the default values for all the variables to be read in
! using the namelist method. In case the user does not specify a
! particular value, this value will be used.
!
!-----------------------------------------------------------------------
!
nx = 67
ny = 67
nz = 35
vnx = 163
vny = 99
vnz = 43
iorder = 3
hinfmt = 10
grdbasfn = 'may20.grbgrdbas'
filename = 'may20.grb003600'
runnmin = 'diffm20'
hdmpfmt = 10
grdout = 0
basout = 0
varout = 1
mstout = 1
iceout = 0
trbout = 0
sfcout = 0
rainout = 0
prcout = 0
radout = 0
flxout = 0
filcmprs = 0
!-----------------------------------------------------------------------
!
! Read in nx,ny,nz and vnx, vny, vnz
!
!----------------------------------------------------------------------
READ(5,grid_dims,END=100)
WRITE(6,'(a)')'Namelist block grid_dims sucessfully read in.'
READ(5,vgrid_dims,END=100)
WRITE(6,'(a)')'Namelist block vgrid_dims sucessfully read in.'
vnxy=vnx*vny
vnxz=vnx*vnz
vnyz=vny*vnz
vnxyz=vnxy*vnz
!
!-----------------------------------------------------------------------
! Allocate and Initialize the variables
!----------------------------------------------------------------------
istatus=0
ALLOCATE( x=0
ALLOCATE( y=0
ALLOCATE( z=0
ALLOCATE(zp(nx,ny,nz),STAT=istatus)
zp=0
ALLOCATE(j1(nx,ny,nz),STAT=istatus)
j1=0
ALLOCATE(j2(nx,ny,nz),STAT=istatus)
j2=0
ALLOCATE(j3(nx,ny,nz),STAT=istatus)
j3=0
ALLOCATE(hterain(nx,ny),STAT=istatus)
hterain=0
ALLOCATE(uprt(nx,ny,nz),STAT=istatus)
uprt=0
ALLOCATE(vprt(nx,ny,nz),STAT=istatus)
vprt=0
ALLOCATE(wprt(nx,ny,nz),STAT=istatus)
wprt=0
ALLOCATE(ptprt(nx,ny,nz),STAT=istatus)
ptprt=0
ALLOCATE(pprt(nx,ny,nz),STAT=istatus)
pprt=0
ALLOCATE(qvprt(nx,ny,nz),STAT=istatus)
qvprt=0
ALLOCATE(qc(nx,ny,nz),STAT=istatus)
qc=0
ALLOCATE(qr(nx,ny,nz),STAT=istatus)
qr=0
ALLOCATE(qi(nx,ny,nz),STAT=istatus)
qi=0
ALLOCATE(qs(nx,ny,nz),STAT=istatus)
qs=0
ALLOCATE(qh(nx,ny,nz),STAT=istatus)
qh=0
ALLOCATE(tke(nx,ny,nz),STAT=istatus)
tke=0
ALLOCATE(kmh(nx,ny,nz),STAT=istatus)
kmh=0
ALLOCATE(kmv(nx,ny,nz),STAT=istatus)
kmv=0
ALLOCATE(ubar(nx,ny,nz),STAT=istatus)
ubar=0
ALLOCATE(vbar(nx,ny,nz),STAT=istatus)
vbar=0
ALLOCATE(wbar(nx,ny,nz),STAT=istatus)
wbar=0
ALLOCATE(ptbar(nx,ny,nz),STAT=istatus)
ptbar=0
ALLOCATE(pbar(nx,ny,nz),STAT=istatus)
pbar=0
ALLOCATE(rhobar(nx,ny,nz),STAT=istatus)
rhobar=0
ALLOCATE(qvbar(nx,ny,nz),STAT=istatus)
qvbar=0
ALLOCATE(soiltyp(nx,ny,nstyps),STAT=istatus)
soiltyp=0
ALLOCATE(stypfrct(nx,ny,nstyps),STAT=istatus)
stypfrct=0
ALLOCATE(vegtyp(nx,ny),STAT=istatus)
vegtyp=0
ALLOCATE(lai(nx,ny),STAT=istatus)
lai=0
ALLOCATE(roufns(nx,ny),STAT=istatus)
roufns=0
ALLOCATE(veg(nx,ny),STAT=istatus)
veg=0
ALLOCATE(tsfc(nx,ny,0:nstyps),STAT=istatus)
tsfc=0
ALLOCATE(tsoil(nx,ny,0:nstyps),STAT=istatus)
tsoil=0
ALLOCATE(wetsfc(nx,ny,0:nstyps),STAT=istatus)
wetsfc=0
ALLOCATE(wetdp(nx,ny,0:nstyps),STAT=istatus)
wetdp=0
ALLOCATE(wetcanp(nx,ny,0:nstyps),STAT=istatus)
wetcanp=0
ALLOCATE(snowdpth(nx,ny),STAT=istatus)
snowdpth=0
ALLOCATE(raing(nx,ny),STAT=istatus)
raing=0
ALLOCATE(rainc(nx,ny),STAT=istatus)
rainc=0
ALLOCATE(prcrate(nx,ny,4),STAT=istatus)
prcrate=0
ALLOCATE(radfrc(nx,ny,nz),STAT=istatus)
radfrc=0
ALLOCATE(radsw(nx,ny),STAT=istatus)
radsw=0
ALLOCATE(rnflx(nx,ny),STAT=istatus)
rnflx=0
ALLOCATE(usflx(nx,ny),STAT=istatus)
usflx=0
ALLOCATE(vsflx(nx,ny),STAT=istatus)
vsflx=0
ALLOCATE(ptsflx(nx,ny),STAT=istatus)
ptsflx=0
ALLOCATE(qvsflx(nx,ny),STAT=istatus)
qvsflx=0
ALLOCATE(vx(vnx),STAT=istatus)
vx=0
ALLOCATE(vy(vny),STAT=istatus)
vy=0
ALLOCATE(vz(vnz),STAT=istatus)
vz=0
ALLOCATE(vzp(vnx,vny,vnz),STAT=istatus)
vzp=0
ALLOCATE(vuprt(vnx,vny,vnz),STAT=istatus)
vuprt=0
ALLOCATE(vvprt(vnx,vny,vnz),STAT=istatus)
vvprt=0
ALLOCATE(vwprt(vnx,vny,vnz),STAT=istatus)
vwprt=0
ALLOCATE(vptprt(vnx,vny,vnz),STAT=istatus)
vptprt=0
ALLOCATE(vpprt(vnx,vny,vnz),STAT=istatus)
vpprt=0
ALLOCATE(vqvprt(vnx,vny,vnz),STAT=istatus)
vqvprt=0
ALLOCATE(vqc(vnx,vny,vnz),STAT=istatus)
vqc=0
ALLOCATE(vqr(vnx,vny,vnz),STAT=istatus)
vqr=0
ALLOCATE(vqi(vnx,vny,vnz),STAT=istatus)
vqi=0
ALLOCATE(vqs(vnx,vny,vnz),STAT=istatus)
vqs=0
ALLOCATE(vqh(vnx,vny,vnz),STAT=istatus)
vqh=0
ALLOCATE(vtke(nx,ny,nz),STAT=istatus)
vtke=0
ALLOCATE(vkmh(nx,ny,nz),STAT=istatus)
vkmh=0
ALLOCATE(vkmv(nx,ny,nz),STAT=istatus)
vkmv=0
ALLOCATE(vubar(vnx,vny,vnz),STAT=istatus)
vubar=0
ALLOCATE(vvbar(vnx,vny,vnz),STAT=istatus)
vvbar=0
ALLOCATE(vwbar(vnx,vny,vnz),STAT=istatus)
vwbar=0
ALLOCATE(vptbar(vnx,vny,vnz),STAT=istatus)
vptbar=0
ALLOCATE(vpbar(vnx,vny,vnz),STAT=istatus)
vpbar=0
ALLOCATE(vrhobar(vnx,vny,vnz),STAT=istatus)
vrhobar=0
ALLOCATE(vqvbar(vnx,vny,vnz),STAT=istatus)
vqvbar=0
ALLOCATE(vsoiltyp(vnx,vny,nstyps),STAT=istatus)
vsoiltyp=0
ALLOCATE(vstypfrct(vnx,vny,nstyps),STAT=istatus)
vstypfrct=0
ALLOCATE(vvegtyp(vnx,vny),STAT=istatus)
vvegtyp=0
ALLOCATE(vlai(vnx,vny),STAT=istatus)
vlai=0
ALLOCATE(vroufns(vnx,vny),STAT=istatus)
vroufns=0
ALLOCATE(vveg(vnx,vny),STAT=istatus)
vveg=0
ALLOCATE(vtsfc(vnx,vny,0:nstyps),STAT=istatus)
vtsfc=0
ALLOCATE(vtsoil(vnx,vny,0:nstyps),STAT=istatus)
vtsoil=0
ALLOCATE(vwetsfc(vnx,vny,0:nstyps),STAT=istatus)
vwetsfc=0
ALLOCATE(vwetdp(vnx,vny,0:nstyps),STAT=istatus)
vwetdp=0
ALLOCATE(vwetcanp(vnx,vny,0:nstyps),STAT=istatus)
vwetcanp=0
ALLOCATE(vsnowdpth(vnx,vny),STAT=istatus)
vsnowdpth=0
ALLOCATE(vraing(vnx,vny),STAT=istatus)
vraing=0
ALLOCATE(vrainc(vnx,vny),STAT=istatus)
vrainc=0
ALLOCATE(vprcrate(vnx,vny,4),STAT=istatus)
vprcrate=0
ALLOCATE(vradfrc(vnx,vny,vnz),STAT=istatus)
vradfrc=0
ALLOCATE(vradsw(vnx,vny),STAT=istatus)
vradsw=0
ALLOCATE(vrnflx(vnx,vny),STAT=istatus)
vrnflx=0
ALLOCATE(vusflx(vnx,vny),STAT=istatus)
vusflx=0
ALLOCATE(vvsflx(vnx,vny),STAT=istatus)
vvsflx=0
ALLOCATE(vptsflx(vnx,vny),STAT=istatus)
vptsflx=0
ALLOCATE(vqvsflx(vnx,vny),STAT=istatus)
vqvsflx=0
ALLOCATE(auprt(nx,ny,nz),STAT=istatus)
auprt=0
ALLOCATE(avprt(nx,ny,nz),STAT=istatus)
avprt=0
ALLOCATE(awprt(nx,ny,nz),STAT=istatus)
awprt=0
ALLOCATE(aptprt(nx,ny,nz),STAT=istatus)
aptprt=0
ALLOCATE(apprt(nx,ny,nz),STAT=istatus)
apprt=0
ALLOCATE(aqvprt(nx,ny,nz),STAT=istatus)
aqvprt=0
ALLOCATE(aqc(nx,ny,nz),STAT=istatus)
aqc=0
ALLOCATE(aqr(nx,ny,nz),STAT=istatus)
aqr=0
ALLOCATE(aqi(nx,ny,nz),STAT=istatus)
aqi=0
ALLOCATE(aqs(nx,ny,nz),STAT=istatus)
aqs=0
ALLOCATE(aqh(nx,ny,nz),STAT=istatus)
aqh=0
ALLOCATE(atke(nx,ny,nz),STAT=istatus)
atke=0
ALLOCATE(akmh(nx,ny,nz),STAT=istatus)
akmh=0
ALLOCATE(akmv(nx,ny,nz),STAT=istatus)
akmv=0
ALLOCATE(aubar(nx,ny,nz),STAT=istatus)
aubar=0
ALLOCATE(avbar(nx,ny,nz),STAT=istatus)
avbar=0
ALLOCATE(awbar(nx,ny,nz),STAT=istatus)
awbar=0
ALLOCATE(aptbar(nx,ny,nz),STAT=istatus)
aptbar=0
ALLOCATE(apbar(nx,ny,nz),STAT=istatus)
apbar=0
ALLOCATE(arhobar(nx,ny,nz),STAT=istatus)
arhobar=0
ALLOCATE(aqvbar(nx,ny,nz),STAT=istatus)
aqvbar=0
ALLOCATE(asoiltyp(nx,ny,nstyps),STAT=istatus)
asoiltyp=0
ALLOCATE(astypfrct(nx,ny,nstyps),STAT=istatus)
astypfrct=0
ALLOCATE(avegtyp(nx,ny),STAT=istatus)
avegtyp=0
ALLOCATE(alai(nx,ny),STAT=istatus)
alai=0
ALLOCATE(aroufns(nx,ny),STAT=istatus)
aroufns=0
ALLOCATE(aveg(nx,ny),STAT=istatus)
aveg=0
ALLOCATE(atsfc(nx,ny,0:nstyps),STAT=istatus)
atsfc=0
ALLOCATE(atsoil(nx,ny,0:nstyps),STAT=istatus)
atsoil=0
ALLOCATE(awetsfc(nx,ny,0:nstyps),STAT=istatus)
awetsfc=0
ALLOCATE(awetdp(nx,ny,0:nstyps),STAT=istatus)
awetdp=0
ALLOCATE(awetcanp(nx,ny,0:nstyps),STAT=istatus)
awetcanp=0
ALLOCATE(asnowdpth(nx,ny),STAT=istatus)
asnowdpth=0
ALLOCATE(araing(nx,ny),STAT=istatus)
araing=0
ALLOCATE(arainc(nx,ny),STAT=istatus)
arainc=0
ALLOCATE(aprcrate(nx,ny,4),STAT=istatus)
aprcrate=0
ALLOCATE(aradfrc(nx,ny,nz),STAT=istatus)
aradfrc=0
ALLOCATE(aradsw(nx,ny),STAT=istatus)
aradsw=0
ALLOCATE(arnflx(nx,ny),STAT=istatus)
arnflx=0
ALLOCATE(ausflx(nx,ny),STAT=istatus)
ausflx=0
ALLOCATE(avsflx(nx,ny),STAT=istatus)
avsflx=0
ALLOCATE(aptsflx(nx,ny),STAT=istatus)
aptsflx=0
ALLOCATE(aqvsflx(nx,ny),STAT=istatus)
aqvsflx=0
ALLOCATE(tem1(nx,ny,nz),STAT=istatus)
tem1=0
ALLOCATE(tem2(nx,ny,nz),STAT=istatus)
tem2=0
ALLOCATE(tem3(nx,ny,nz),STAT=istatus)
tem3=0
ALLOCATE(vtem1(vnx,vny,vnz),STAT=istatus)
vtem1=0
ALLOCATE(vtem2(vnx,vny,vnz),STAT=istatus)
vtem2=0
ALLOCATE(vtem3(vnx,vny,vnz),STAT=istatus)
vtem3=0
ALLOCATE(xs(nx),STAT=istatus)
xs=0
ALLOCATE(ys(ny),STAT=istatus)
ys=0
ALLOCATE(zps(nx,ny,nz),STAT=istatus)
zps=0
ALLOCATE(x2d(nx,ny),STAT=istatus)
x2d=0
ALLOCATE(y2d(nx,ny),STAT=istatus)
y2d=0
ALLOCATE(lat(nx,ny),STAT=istatus)
lat=0
ALLOCATE(lon(nx,ny),STAT=istatus) ! EMK
lon=0 ! EMK
ALLOCATE(vxs(vnx),STAT=istatus)
vxs=0
ALLOCATE(vys(vny),STAT=istatus)
vys=0
ALLOCATE(vzps(vnx,vny,vnz),STAT=istatus)
vzps=0
ALLOCATE(dxfld(vnx),STAT=istatus)
dxfld=0
ALLOCATE(dyfld(vny),STAT=istatus)
dyfld=0
ALLOCATE(rdxfld(vnx),STAT=istatus)
rdxfld=0
ALLOCATE(rdyfld(vny),STAT=istatus)
rdyfld=0
ALLOCATE(iloc(nx,ny),STAT=istatus)
iloc=0
ALLOCATE(jloc(nx,ny),STAT=istatus)
jloc=0
ALLOCATE(zpver(nx,ny,vnz),STAT=istatus)
zpver=0
mgrid = 1
nestgrd = 0
grbpkbit = 16
READ(5,frcst_fn,END=100)
WRITE(6,'(a)')'Namelist block frcst_fn sucessfully read in.'
lengbf=LEN_trim(grdbasfn)
WRITE(6,'(/a,a)')' The grid/base name is ', grdbasfn(1:lengbf)
lenfil = LEN_trim(filename)
WRITE(6,'(/a,/1x,a)')' The data set name is ', filename(1:lenfil)
!
!-----------------------------------------------------------------------
!
! Read all input data arrays
!
!-----------------------------------------------------------------------
!
CALL dtaread
(nx,ny,nz,nstyps, &
hinfmt,nch,grdbasfn(1:lengbf),lengbf, &
filename(1:lenfil),lenfil,time, &
x,y,z,zp, uprt ,vprt ,wprt ,ptprt, pprt , &
qvprt, qc, qr, qi, qs, qh, tke,kmh,kmv, &
ubar, vbar, wbar, ptbar, pbar, rhobar, qvbar, &
soiltyp,stypfrct,vegtyp,lai,roufns,veg, &
tsfc,tsoil,wetsfc,wetdp,wetcanp,snowdpth, &
raing,rainc,prcrate, &
radfrc,radsw,rnflx, &
usflx,vsflx,ptsflx,qvsflx, &
ireturn, tem1,tem2,tem3)
!
!-----------------------------------------------------------------------
!
! ireturn = 0 for a successful read
!
!-----------------------------------------------------------------------
!
IF( ireturn == 0 ) THEN ! successful read
curtim=time
fcrnam=runname
ifproj=mapproj
fscale=sclfct
flatnot(1)=trulat1
flatnot(2)=trulat2
ftrulon=trulon
fdx=x(3)-x(2)
fdy=y(3)-y(2)
fctrlat=ctrlat
fctrlon=ctrlon
CALL setmapr(ifproj,fscale,flatnot,ftrulon)
CALL lltoxy(1,1,fctrlat,fctrlon,xctr,yctr)
fx0=xctr-fdx*((nx-3)/2)
fy0=yctr-fdy*((ny-3)/2)
CALL setorig(1,fx0,fy0)
!
!-----------------------------------------------------------------------
!
! Establish coordinate for scalar forecast fields.
!
!-----------------------------------------------------------------------
!
DO i=1,nx-1
xs(i)=0.5*(x(i)+x(i+1))
END DO
xs(nx)=2.*xs(nx-1)-xs(nx-2)
DO j=1,ny-1
ys(j)=0.5*(y(j)+y(j+1))
END DO
ys(ny)=2.*ys(ny-1)-ys(ny-2)
CALL xytoll(nx,ny,xs,ys,lat,lon)
DO k=1,nz-1
DO j=1,ny
DO i=1,nx
zps(i,j,k)=0.5*(zp(i,j,k)+zp(i,j,k+1))
END DO
END DO
END DO
!
!-----------------------------------------------------------------------
!
! Get verification data file info including the name of the input data set.
!
!-----------------------------------------------------------------------
!
READ(5,vrftn_fn,END=100)
WRITE(6,'(a)')'Namelist block vrftn_fn sucessfully read in.'
lengbf=LEN_trim(vgrdbasfn)
WRITE(6,'(/a,a)')' The grid/base name is ', vgrdbasfn(1:lengbf)
lenfil=LEN_trim(vfilename)
WRITE(6,'(/a,a)')' The data set name is ', vfilename(1:lenfil)
!
!-----------------------------------------------------------------------
!
! Set the gridread parameter to 0 so that the verification
! grid/base file will be read.
!
!-----------------------------------------------------------------------
!
CALL setgbrd (0)
!
!-----------------------------------------------------------------------
!
! Read in the verification data.
!
!-----------------------------------------------------------------------
!
CALL dtaread(vnx,vny,vnz,nstyps, &
vhinfmt,nch,vgrdbasfn(1:lengbf),lengbf, &
vfilename(1:lenfil),lenfil,time, &
vx,vy,vz,vzp, vuprt ,vvprt ,vwprt ,vptprt, vpprt , &
vqvprt, vqc, vqr, vqi, vqs, vqh, vtke,vkmh,vkmv, &
vubar, vvbar, vwbar, vptbar, vpbar, vrhobar, vqvbar, &
vsoiltyp,vstypfrct,vvegtyp,vlai,vroufns,vveg, &
vtsfc,vtsoil,vwetsfc,vwetdp,vwetcanp,vsnowdpth, &
vraing,vrainc,vprcrate, &
vradfrc,vradsw,vrnflx, &
vusflx,vvsflx,vptsflx,vqvsflx, &
ireturn, vtem1,vtem2,vtem3)
ivproj=mapproj
vscale=sclfct
vlatnot(1)=trulat1
vlatnot(2)=trulat2
vtrulon=trulon
vdx=vx(3)-vx(2)
vdy=vy(3)-vy(2)
vctrlat=ctrlat
vctrlon=ctrlon
CALL setmapr(ivproj,vscale,vlatnot,vtrulon)
CALL lltoxy(1,1,vctrlat,vctrlon,xctr,yctr)
vx0=xctr-vdx*((vnx-3)/2)
vy0=yctr-vdy*((vny-3)/2)
CALL setorig(1,vx0,vy0)
!
!-----------------------------------------------------------------------
!
! Establish coordinate for scalar verification fields.
!
!-----------------------------------------------------------------------
!
DO i=1,vnx-1
vxs(i)=0.5*(vx(i)+vx(i+1))
END DO
vxs(vnx)=2.*vxs(vnx-1)-vxs(vnx-2)
DO j=1,vny-1
vys(j)=0.5*(vy(j)+vy(j+1))
END DO
vys(vny)=2.*vys(vny-1)-vys(vny-2)
DO k=1,vnz-1
DO j=1,vny
DO i=1,vnx
vzps(i,j,k)=0.5*(vzp(i,j,k)+vzp(i,j,k+1))
END DO
END DO
END DO
!
!-----------------------------------------------------------------------
!
! Find location of scalar forecast fields in verification grid.
!
!-----------------------------------------------------------------------
!
IF(fx0 == vx0 .AND. fy0 == vy0 .AND. &
flatnot(1) == vlatnot(1) .AND. flatnot(2) == vlatnot(2) .AND. &
ftrulon == vtrulon .AND. ifproj == ivproj .AND. &
fscale == vscale ) THEN
comcoord=.true.
WRITE(6,'(//a//)') ' Grids share a common coordinate system'
DO j=1,ny
DO i=1,nx
x2d(i,j)=xs(i)
END DO
END DO
DO j=1,ny
DO i=1,nx
y2d(i,j)=ys(j)
END DO
END DO
ELSE
comcoord=.false.
WRITE(6,'(//a,a//)') ' Grid coordinate systems differ', &
' Will convert coordinates via lat,lon.'
CALL lltoxy(nx,ny,lat,lon,x2d,y2d)
END IF
!
!-----------------------------------------------------------------------
!
! Interpolate verification scalars to forecast grid.
!
!-----------------------------------------------------------------------
!
!EMK Special for same grids
IF ((comcoord) .AND. (nx == vnx) .AND. (ny == vny) .AND. &
(nz == vnz)) THEN
comcoord2 = .TRUE.
DO k = 1,nz
IF (z(k) /= vz(k)) comcoord2 = .FALSE.
END DO
IF (comcoord2) THEN
aptprt = vptprt
apprt = vpprt
aqvprt = vqvprt
aqc = vqc
aqr = vqr
aqi = vqi
aqs = vqs
aqh = vqh
atke = vtke
akmh = vkmh
akmv = vkmv
aptbar = vptbar
apbar = vpbar
arhobar = vrhobar
aqvbar = vqvbar
atsfc = vtsfc
atsoil = vtsoil
awetdp = vwetdp
awetcanp = vwetcanp
awetsfc = vwetsfc
araing = vraing
arainc = vrainc
aprcrate = vprcrate
aradfrc = vradfrc
aradsw = vradsw
arnflx = vrnflx
ausflx = vusflx
avsflx = vvsflx
aptsflx = vptsflx
aqvsflx = vqvsflx
awbar = vwbar
awprt = vwprt
avbar = vvbar
avprt = vvprt
aubar = vubar
auprt = vuprt
GO TO 1000 ! Skip interpolation
END IF
END IF
!EMK Special for same grids
CALL setdxdy(vnx,vny, &
1,vnx-1,1,vny-1, &
vxs,vys,dxfld,dyfld,rdxfld,rdyfld)
CALL intsclrs(nx, ny, nz, vnx, vny, vnz, &
1, nx-1,1, ny-1,1, nz-1, &
1,vnx-1,1,vny-1,1,vnz-1, &
iorder, &
x2d, y2d, zps,vxs,vys,vzps, &
vptprt, vpprt, &
vqvprt, vqc, vqr, vqi, vqs, vqh, vtke,vkmh,vkmv, &
vptbar, vpbar, vrhobar, vqvbar, &
vtsfc,vtsoil,vwetsfc,vwetdp,vwetcanp, &
vraing,vrainc,vprcrate, &
vradfrc,vradsw,vrnflx, &
vusflx,vvsflx,vptsflx,vqvsflx, &
aptprt, apprt, &
aqvprt, aqc, aqr, aqi, aqs, aqh, atke,akmh,akmv, &
aptbar, apbar, arhobar, aqvbar, &
atsfc,atsoil,awetsfc,awetdp,awetcanp, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
iloc,jloc,zpver,dxfld,dyfld,rdxfld,rdyfld, &
vtem1,vtem2,vtem3, &
ireturn )
!
!-----------------------------------------------------------------------
!
! Interpolate verification w to forecast grid.
!
!-----------------------------------------------------------------------
!
CALL intonef(nx, ny, nz, vnx, vny, vnz, &
1,nx-1,1,ny-1,1,nz, &
1,vnx-1,1,vny-1,1,vnz, &
iorder, &
x2d, y2d, zp, vxs,vys,vzp, &
vwprt, vwbar, awprt, awbar, &
iloc,jloc,zpver,dxfld,dyfld,rdxfld,rdyfld, &
vtem1,vtem2,vtem3, &
ireturn )
!
!-----------------------------------------------------------------------
!
! Find location of u forecast field in verification grid.
!
!-----------------------------------------------------------------------
!
IF(comcoord) THEN
DO j=1,ny
DO i=1,nx
x2d(i,j)=x(i)
END DO
END DO
ELSE
CALL setmapr(ifproj,fscale,flatnot,ftrulon)
CALL setorig(1,fx0,fy0)
CALL xytoll(nx,ny,x,ys,lat,lon)
CALL setmapr(ivproj,vscale,vlatnot,vtrulon)
CALL setorig(1,vx0,vy0)
CALL lltoxy(nx,ny,lat,lon,x2d,y2d)
END IF
!
!-----------------------------------------------------------------------
!
! Interpolate verification u to forecast grid.
!
!-----------------------------------------------------------------------
!
CALL setdxdy(vnx,vny, &
1,vnx,1,vny-1, &
vx,vys,dxfld,dyfld,rdxfld,rdyfld)
CALL intonef(nx, ny, nz, vnx, vny, vnz, &
1,nx,1,ny-1,1,nz-1, &
1,vnx,1,vny-1,1,vnz-1, &
iorder, &
x2d, y2d, zp, vxs,vys,vzp, &
vuprt, vubar, auprt, aubar, &
iloc,jloc,zpver,dxfld,dyfld,rdxfld,rdyfld, &
vtem1,vtem2,vtem3, &
ireturn )
!
!-----------------------------------------------------------------------
!
! Find location of v forecast field in verification grid.
!
!-----------------------------------------------------------------------
!
IF(comcoord) THEN
DO j=1,ny
DO i=1,nx
x2d(i,j)=xs(i)
END DO
END DO
DO j=1,ny
DO i=1,nx
y2d(i,j)=y(j)
END DO
END DO
ELSE
CALL setmapr(ifproj,fscale,flatnot,ftrulon)
CALL setorig(1,fx0,fy0)
CALL xytoll(nx,ny,xs,y,lat,lon)
CALL setmapr(ivproj,vscale,vlatnot,vtrulon)
CALL setorig(1,vx0,vy0)
CALL lltoxy(nx,ny,lat,lon,x2d,y2d)
END IF
!
!-----------------------------------------------------------------------
!
! Interpolate verification v to forecast grid.
!
!-----------------------------------------------------------------------
!
CALL setdxdy(vnx,vny, &
1,vnx-1,1,vny, &
vxs,vy,dxfld,dyfld,rdxfld,rdyfld)
CALL intonef(nx, ny, nz, vnx, vny, vnz, &
1,nx-1,1,ny,1,nz-1, &
1,vnx-1,1,vny,1,vnz-1, &
iorder, &
x2d, y2d, zp, vxs,vys,vzp, &
vvprt, vvbar, avprt, avbar, &
iloc,jloc,zpver,dxfld,dyfld,rdxfld,rdyfld, &
vtem1,vtem2,vtem3, &
ireturn )
!
!-----------------------------------------------------------------------
!
! Find difference = forecast - verification
!
! To reduce memory requirements, the difference fields are
! written to the same arrays as the interpolated fields.
!
!-----------------------------------------------------------------------
!
1000 CONTINUE
CALL diffield(nx,ny,nz, &
uprt, vprt, wprt, ptprt, pprt, &
qvprt, qc, qr, qi, qs, qh, tke,kmh,kmv, &
ubar, vbar, wbar, ptbar, pbar, rhobar, qvbar, &
tsfc,tsoil,wetsfc,wetdp,wetcanp, &
raing,rainc,prcrate, &
radfrc,radsw,rnflx, &
usflx,vsflx,ptsflx,qvsflx, &
auprt, avprt, awprt, aptprt, apprt, &
aqvprt, aqc, aqr, aqi, aqs, aqh, atke,akmh,akmv, &
aubar, avbar, awbar, aptbar, apbar, arhobar, aqvbar, &
atsfc,atsoil,awetsfc,awetdp,awetcanp, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
auprt, avprt, awprt, aptprt, apprt, &
aqvprt, aqc, aqr, aqi, aqs, aqh, atke,akmh,akmv, &
tem1,atsfc,atsoil,awetsfc,awetdp,awetcanp, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
ireturn )
!
!-----------------------------------------------------------------------
!
! Set output variables to forecast coordinates
!
!-----------------------------------------------------------------------
!
curtim=time
mapproj=ifproj
sclfct=fscale
trulat1=flatnot(1)
trulat2=flatnot(2)
trulon=ftrulon
ctrlat=fctrlat
ctrlon=fctrlon
!
!-----------------------------------------------------------------------
!
! Get output info
!
!-----------------------------------------------------------------------
!
WRITE(6,'(/a/)')' Please tell the program about the OUTPUT file'
!
!-----------------------------------------------------------------------
!
! Get runname to use for output data.
!
!-----------------------------------------------------------------------
!
READ(5,output,END=100)
WRITE(6,'(/5x,a,a)') 'The output run name is: ', runnmin
runname=runnmin
!
!-----------------------------------------------------------------------
!
! Find out the number of characters to be used to construct file
! names.
!
!-----------------------------------------------------------------------
!
CALL gtlfnkey( runname, lfnkey )
!
!-----------------------------------------------------------------------
!
! Find out the number of characters to be used to construct file
! names.
!
!-----------------------------------------------------------------------
!
CALL gtlfnkey( runname, lfnkey )
!
WRITE(6,'(a)')' Please input the data format flag value 1/2/3/4 '
!
!-----------------------------------------------------------------------
!
! Set control parameters for
! grid, base state, moisture, and ice variable dumping.
!
!-----------------------------------------------------------------------
!
varout=1
WRITE(6,'(a/a/a)') &
' Will it contain any grid information? (1 or 0)', &
' If it will not, grid and base information will be dumped', &
' to a separate file (filename input later as grdbasfn).'
WRITE(6,'(a)') &
' Will it contain any base state data? (1 or 0)'
WRITE(6,'(2(/5x,a)/)') &
'Do you want to write u, v, w, ptprt and pprt arrays?', &
'(select 0 or 1)'
WRITE(6,'(a)') &
' Write moisture fields to the output file?(1 or 0)'
WRITE(6,'(a)')' Write ice fields to the output file?(1 or 0)'
WRITE(6,'(a)') &
' Write turbulence fields to the output file?(1 or 0)'
WRITE(6,'(a)') &
' Write surface (soil) fields to the output file?(1 or 0)'
WRITE(6,'(a)')' Write rain fields to the output file?(1 or 0)'
WRITE(6,'(a)')' Write precipitation rate to output file?(1 or 0)'
WRITE(6,'(a)')' Write radiation arrays to output file?(1 or 0)'
WRITE(6,'(a)')' Write the surface fluxes to output file?(1 or 0)'
WRITE(6,'(/5x,a/)') &
'Do you want to compress the output data? (select 0 or 1)'
CALL gtbasfn(runname(1:lfnkey),'./',2,hdmpfmt,mgrid,nestgrd, &
grdbasfn, lengbf)
WRITE(6,'(/1x,a,a)') &
'Output grid/base state file is ', grdbasfn(1:lengbf)
nchdmp = 80
grdbas = 1 ! Dump out grd and base state arrays only
DO k=1,nz
DO j=1,ny
DO i=1,nx
auprt(i,j,k)=aubar(i,j,k)+auprt(i,j,k)
avprt(i,j,k)=avbar(i,j,k)+avprt(i,j,k)
awprt(i,j,k)=awbar(i,j,k)+awprt(i,j,k)
aqvprt(i,j,k)=aqvbar(i,j,k)+aqvprt(i,j,k)
END DO
END DO
END DO
CALL dtadump(nx,ny,nz,nstyps, &
hdmpfmt,nchdmp,grdbasfn(1:lengbf),grdbas,filcmprs, &
auprt,avprt,awprt,aptprt,apprt, &
aqvprt,aqc,aqr,aqi,aqs,aqh,atke,akmh,akmv, &
ubar,vbar,wbar,ptbar,pbar,rhobar,qvbar, &
x,y,z,zp,hterain,j1,j2,j3, &
asoiltyp,astypfrct,avegtyp,alai,aroufns,aveg, &
atsfc,atsoil,awetsfc,awetdp,awetcanp,asnowdpth, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
tem1,tem2,tem3)
!
!-----------------------------------------------------------------------
!
! Find a unique name hdmpfn(1:ldmpf) for history dump data set
! at time 'curtim'.
!
!-----------------------------------------------------------------------
!
CALL gtdmpfn(runname(1:lfnkey),'./',2, &
curtim,hdmpfmt, &
mgrid,nestgrd, hdmpfn, ldmpf)
WRITE(6,'(/1x,a,f10.0,a,a)') &
'Output file at time ',curtim,' (s) is ', hdmpfn(1:ldmpf)
grdbas = 0 ! Not just dump out grd and base state arrays only
CALL dtadump(nx,ny,nz,nstyps, &
hdmpfmt,nchdmp,hdmpfn(1:ldmpf),grdbas,filcmprs, &
auprt,avprt,awprt,aptprt,apprt, &
aqvprt,aqc,aqr,aqi,aqs,aqh,atke,akmh,akmv, &
ubar,vbar,wbar,ptbar,pbar,rhobar,qvbar, &
x,y,z,zp,hterain, j1,j2,j3, &
asoiltyp,astypfrct,avegtyp,alai,aroufns,aveg, &
atsfc,atsoil,awetsfc,awetdp,awetcanp,asnowdpth, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
tem1,tem2,tem3)
END IF
GOTO 101
100 CONTINUE
WRITE(6,'(a)')'Namelist block READ in error. Then program will terminated.'
101 CONTINUE
STOP
END PROGRAM arpsdiff
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE DIFFIELD ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE diffield(nx,ny,nz, & 1,28
uprt, vprt, wprt, ptprt, pprt, &
qvprt, qc, qr, qi, qs, qh, tke,kmh,kmv, &
ubar, vbar, wbar, ptbar, pbar, rhobar, qvbar, &
tsfc,tsoil,wetsfc,wetdp,wetcanp, &
raing,rainc,prcrate, &
radfrc,radsw,rnflx, &
usflx,vsflx,ptsflx,qvsflx, &
auprt, avprt, awprt, aptprt, apprt, &
aqvprt, aqc, aqr, aqi, aqs, aqh, atke,akmh,akmv, &
aubar, avbar, awbar, aptbar, apbar, arhobar, aqvbar, &
atsfc,atsoil,awetsfc,awetdp,awetcanp, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
duprt, dvprt, dwprt, dptprt, dpprt, &
dqvprt, dqc, dqr, dqi, dqs, dqh, dtke,dkmh,dkmv,tem1, &
dtsfc,dtsoil,dwetsfc,dwetdp,dwetcanp, &
draing,drainc,dprcrate, &
dradfrc,dradsw,drnflx, &
dusflx,dvsflx,dptsflx,dqvsflx, &
ireturn)
!
!
!-----------------------------------------------------------------------
!
! PURPOSE:
!
! Subtract the forecast fields from the interpolated verification
! fields (names beginning with "a") and output to the difference
! fields (names beginning with "d"). The input and difference
! fields may share the same storage location. For this subroutine
! it is assumed the forecast and corresponding verification
! data are at the same physical location, however, the physical
! location may differ between variables. That is uprt and auprt
! are at the same location, but that may differ from pprt and apprt.
!
!
!-----------------------------------------------------------------------
!
! AUTHOR: Keith Brewster Ou School of Meteorology. April 1992
!
! MODIFICATION HISTORY:
! 14 May 1992 (KB) changed from arps2.5 to arps3.0
! 03 Aug 1992 (KB) updated to account for changes in arps3.0
!
! 09/07/1995 (KB)
! Added differencing of surface (soil) fields.
!
!-----------------------------------------------------------------------
!
! INPUT :
! nx,ny,nz Array dimensions for forecast field.
!
! FORECAST FIELDS:
!
! uprt perturbation x component of velocity (m/s)
! vprt perturbation y component of velocity (m/s)
! wprt perturbation vertical component of velocity in Cartesian
! coordinates (m/s).
!
! ptprt perturbation potential temperature (K)
! pprt perturbation pressure (Pascal)
!
! qvprt perturbation water vapor mixing ratio (kg/kg)
! qc Cloud water mixing ratio (kg/kg)
! qr Rainwater mixing ratio (kg/kg)
! qi Cloud ice mixing ratio (kg/kg)
! qs Snow mixing ratio (kg/kg)
! qh Hail mixing ratio (kg/kg)
!
! ubar Base state x velocity component (m/s)
! vbar Base state y velocity component (m/s)
! wbar Base state z velocity component (m/s)
! ptbar Base state potential temperature (K)
! pbar Base state pressure (Pascal)
! rhobar Base state density (kg/m**3)
! qvbar Base state water vapor mixing ratio (kg/kg)
! tke Turbulent Kinetic Energy ((m/s)**2)
! kmh Horizontal turbulent mixing coefficient (m**2/s)
! kmv Vertical turbulent mixing coefficient (m**2/s)
!
! tsfc Temperature at surface (K)
! tsoil Deep soil temperature (K)
! wetsfc Surface soil moisture
! wetdp Deep soil moisture
! wetcanp Canopy water amount
!
! raing Grid supersaturation rain
! rainc Cumulus convective rain
! prcrate Precipitation rates
!
! radfrc Radiation forcing (K/s)
! radsw Solar radiation reaching the surface
! rnflx Net radiation flux absorbed by surface
!
! usflx Surface flux of u-momentum (kg/(m*s**2))
! vsflx Surface flux of v-momentum (kg/(m*s**2))
! ptsflx Surface heat flux (K*kg/(m**2 * s ))
! qvsflx Surface moisture flux of (kg/(m**2 * s))
!
! INTERPOLATED VERIFICATION FIELDS:
!
! auprt perturbation x component of velocity (m/s)
! avprt perturbation y component of velocity (m/s)
! awprt perturbation vertical component of velocity in Cartesian
! coordinates (m/s).
!
! aptprt perturbation potential temperature (K)
! apprt perturbation pressure (Pascal)
!
! aqvprt perturbation water vapor mixing ratio (kg/kg)
! aqc Cloud water mixing ratio (kg/kg)
! aqr Rainwater mixing ratio (kg/kg)
! aqi Cloud ice mixing ratio (kg/kg)
! aqs Snow mixing ratio (kg/kg)
! aqh Hail mixing ratio (kg/kg)
!
! aubar Base state x velocity component (m/s)
! avbar Base state y velocity component (m/s)
! awbar Base state z velocity component (m/s)
! aptbar Base state potential temperature (K)
! apbar Base state pressure (Pascal)
! arhobar Base state density (kg/m**3)
! aqvbar Base state water vapor mixing ratio (kg/kg)
!
! atsfc Temperature at surface (K)
! atsoil Deep soil temperature (K)
! awetsfc Surface soil moisture
! awetdp Deep soil moisture
! awetcanp Canopy water amount
!
! araing Grid supersaturation rain
! arainc Cumulus convective rain
! aprcrate Precipitation rates
!
! aradfrc Radiation forcing (K/s)
! aradsw Solar radiation reaching the surface
! arnflx Net radiation flux absorbed by surface
!
! ausflx Surface flux of u-momentum (kg/(m*s**2))
! avsflx Surface flux of v-momentum (kg/(m*s**2))
! aptsflx Surface heat flux (K*kg/(m**2 * s ))
! aqvsflx Surface moisture flux of (kg/(m**2 * s))
!
! OUTPUT :
!
! DIFFERENCE FIELDS (may share storage with forecast fields
! or interpolated fields in calling program):
!
! duprt perturbation x component of velocity (m/s)
! dvprt perturbation y component of velocity (m/s)
! dwprt perturbation vertical component of velocity in Cartesian
! coordinates (m/s).
!
! dptprt perturbation potential temperature (K)
! dpprt perturbation pressure (Pascal)
!
! dqvprt perturbation water vapor mixing ratio (kg/kg)
! dqc Cloud water mixing ratio (kg/kg)
! dqr Rainwater mixing ratio (kg/kg)
! dqi Cloud ice mixing ratio (kg/kg)
! dqs Snow mixing ratio (kg/kg)
! dqh Hail mixing ratio (kg/kg)
!
! dtsfc Temperature at surface (K)
! dtsoil Deep soil temperature (K)
! dwetsfc Surface soil moisture
! dwetdp Deep soil moisture
! dwetcanp Canopy water amount
!
! draing Grid supersaturation rain
! drainc Cumulus convective rain
! dprcrate Precipitation rates
!
! dradfrc Radiation forcing (K/s)
! dradsw Solar radiation reaching the surface
! drnflx Net radiation flux absorbed by surface
!
! dusflx Surface flux of u-momentum (kg/(m*s**2))
! dvsflx Surface flux of v-momentum (kg/(m*s**2))
! dptsflx Surface heat flux (K*kg/(m**2 * s ))
! dqvsflx Surface moisture flux of (kg/(m**2 * s))
!
! tem1 Work array
!
!-----------------------------------------------------------------------
!
! Variable Declarations:
!
!-----------------------------------------------------------------------
!
IMPLICIT NONE
INTEGER :: nx,ny,nz ! 3 dimensions of array
!
!-----------------------------------------------------------------------
!
! Model Arrays
!
!-----------------------------------------------------------------------
!
REAL :: uprt (nx,ny,nz) ! Perturbation u-velocity (m/s)
REAL :: vprt (nx,ny,nz) ! Perturbation v-velocity (m/s)
REAL :: wprt (nx,ny,nz) ! Perturbation w-velocity (m/s)
REAL :: ptprt (nx,ny,nz) ! Perturbation potential temperature (K)
REAL :: pprt (nx,ny,nz) ! Perturbation pressure (Pascal)
REAL :: qvprt (nx,ny,nz) ! Perturbation water vapor specific humidity
REAL :: qc (nx,ny,nz) ! Cloud water mixing ratio (kg/kg)
REAL :: qr (nx,ny,nz) ! Rain water mixing ratio (kg/kg)
REAL :: qi (nx,ny,nz) ! Cloud ice mixing ratio (kg/kg)
REAL :: qs (nx,ny,nz) ! Snow mixing ratio (kg/kg)
REAL :: qh (nx,ny,nz) ! Hail mixing ratio (kg/kg)
REAL :: tke (nx,ny,nz) ! Turbulent Kinetic Energy ((m/s)**2)
REAL :: kmh (nx,ny,nz) ! Horizontal turb. mixing coef. for
! momentum. ( m**2/s )
REAL :: kmv (nx,ny,nz) ! Vertical turb. mixing coef. for
! momentum. ( m**2/s )
REAL :: ubar (nx,ny,nz) ! Base state u-velocity (m/s)
REAL :: vbar (nx,ny,nz) ! Base state v-velocity (m/s)
REAL :: wbar (nx,ny,nz) ! Base state w-velocity (m/s)
REAL :: ptbar (nx,ny,nz) ! Base state potential temperature (K)
REAL :: pbar (nx,ny,nz) ! Base state pressure (Pascal)
REAL :: rhobar (nx,ny,nz) ! Base state air density (kg/m**3)
REAL :: qvbar (nx,ny,nz) ! Base state water vapor specific humidity
REAL :: tsfc (nx,ny) ! Temperature at surface (K)
REAL :: tsoil (nx,ny) ! Deep soil temperature (K)
REAL :: wetsfc(nx,ny) ! Surface soil moisture
REAL :: wetdp (nx,ny) ! Deep soil moisture
REAL :: wetcanp(nx,ny) ! Canopy water amount
REAL :: raing (nx,ny) ! Grid supersaturation rain
REAL :: rainc (nx,ny) ! Cumulus convective rain
REAL :: prcrate(nx,ny,4) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL :: radfrc(nx,ny,nz) ! Radiation forcing (K/s)
REAL :: radsw (nx,ny) ! Solar radiation reaching the surface
REAL :: rnflx (nx,ny) ! Net radiation flux absorbed by surface
REAL :: usflx (nx,ny) ! Surface flux of u-momentum (kg/(m*s**2))
REAL :: vsflx (nx,ny) ! Surface flux of v-momentum (kg/(m*s**2))
REAL :: ptsflx(nx,ny) ! Surface heat flux (K*kg/(m*s**2))
REAL :: qvsflx(nx,ny) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Verification data interpolated to model grid
!
!-----------------------------------------------------------------------
!
REAL :: auprt (nx,ny,nz) ! Perturbation u-velocity (m/s)
REAL :: avprt (nx,ny,nz) ! Perturbation v-velocity (m/s)
REAL :: awprt (nx,ny,nz) ! Perturbation w-velocity (m/s)
REAL :: aptprt (nx,ny,nz) ! Perturbation potential temperature (K)
REAL :: apprt (nx,ny,nz) ! Perturbation pressure (Pascal)
REAL :: aqvprt (nx,ny,nz) ! Perturbation water vapor specific humidity
REAL :: aqc (nx,ny,nz) ! Cloud water mixing ratio (kg/kg)
REAL :: aqr (nx,ny,nz) ! Rain water mixing ratio (kg/kg)
REAL :: aqi (nx,ny,nz) ! Cloud ice mixing ratio (kg/kg)
REAL :: aqs (nx,ny,nz) ! Snow mixing ratio (kg/kg)
REAL :: aqh (nx,ny,nz) ! Hail mixing ratio (kg/kg)
REAL :: atke (nx,ny,nz) ! Turbulent Kinetic Energy ((m/s)**2)
REAL :: akmh (nx,ny,nz) ! Horizontal turb. mixing coef. for
! momentum. ( m**2/s )
REAL :: akmv (nx,ny,nz) ! Vertical turb. mixing coef. for
! momentum. ( m**2/s )
REAL :: aubar (nx,ny,nz) ! Base state u-velocity (m/s)
REAL :: avbar (nx,ny,nz) ! Base state v-velocity (m/s)
REAL :: awbar (nx,ny,nz) ! Base state w-velocity (m/s)
REAL :: aptbar (nx,ny,nz) ! Base state potential temperature (K)
REAL :: arhobar(nx,ny,nz) ! Base state density (kg/m**3)
REAL :: apbar (nx,ny,nz) ! Base state pressure (Pascal)
REAL :: aqvbar (nx,ny,nz) ! Base state water vapor specific humidity
REAL :: atsfc (nx,ny) ! Temperature at surface (K)
REAL :: atsoil (nx,ny) ! Deep soil temperature (K)
REAL :: awetsfc(nx,ny) ! Surface soil moisture
REAL :: awetdp (nx,ny) ! Deep soil moisture
REAL :: awetcanp(nx,ny) ! Canopy water amount
REAL :: araing (nx,ny) ! Grid supersaturation rain
REAL :: arainc (nx,ny) ! Cumulus convective rain
REAL :: aprcrate(nx,ny,4) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL :: aradfrc(nx,ny,nz) ! Radiation forcing (K/s)
REAL :: aradsw (nx,ny) ! Solar radiation reaching the surface
REAL :: arnflx (nx,ny) ! Net radiation flux absorbed by surface
REAL :: ausflx (nx,ny) ! Surface flux of u-momentum (kg/(m*s**2))
REAL :: avsflx (nx,ny) ! Surface flux of v-momentum (kg/(m*s**2))
REAL :: aptsflx(nx,ny) ! Surface heat flux (K*kg/(m*s**2))
REAL :: aqvsflx(nx,ny) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Difference arrays
!
!-----------------------------------------------------------------------
!
REAL :: duprt (nx,ny,nz) ! perturbation x component of velocity (m/s)
REAL :: dvprt (nx,ny,nz) ! perturbation y component of velocity (m/s)
REAL :: dwprt (nx,ny,nz) ! perturbation vertical component of
! velocity in Cartesian coordinates (m/s)
REAL :: dptprt (nx,ny,nz) ! perturbation potential temperature (K)
REAL :: dpprt (nx,ny,nz) ! perturbation pressure (Pascal)
REAL :: dqvprt (nx,ny,nz) ! perturbation water vapor mixing ratio (kg/kg)
REAL :: dqc (nx,ny,nz) ! Cloud water mixing ratio (kg/kg)
REAL :: dqr (nx,ny,nz) ! Rainwater mixing ratio (kg/kg)
REAL :: dqi (nx,ny,nz) ! Cloud ice mixing ratio (kg/kg)
REAL :: dqs (nx,ny,nz) ! Snow mixing ratio (kg/kg)
REAL :: dqh (nx,ny,nz) ! Hail mixing ratio (kg/kg)
REAL :: dtke (nx,ny,nz) ! Turbulent Kinetic Energy ((m/s)**2)
REAL :: dkmh (nx,ny,nz) ! Horizontal turb. mixing coef. for
! momentum. ( m**2/s )
REAL :: dkmv (nx,ny,nz) ! Vertical turb. mixing coef. for
! momentum. ( m**2/s )
REAL :: dtsfc (nx,ny) ! Temperature at surface (K)
REAL :: dtsoil (nx,ny) ! Deep soil temperature (K)
REAL :: dwetsfc(nx,ny) ! Surface soil moisture
REAL :: dwetdp (nx,ny) ! Deep soil moisture
REAL :: dwetcanp(nx,ny) ! Canopy water amount
REAL :: draing (nx,ny) ! Grid supersaturation rain
REAL :: drainc (nx,ny) ! Cumulus convective rain
REAL :: dprcrate(nx,ny,4) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL :: dradfrc(nx,ny,nz) ! Radiation forcing (K/s)
REAL :: dradsw (nx,ny) ! Solar radiation reaching the surface
REAL :: drnflx (nx,ny) ! Net radiation flux absorbed by surface
REAL :: dusflx (nx,ny) ! Surface flux of u-momentum (kg/(m*s**2))
REAL :: dvsflx (nx,ny) ! Surface flux of v-momentum (kg/(m*s**2))
REAL :: dptsflx(nx,ny) ! Surface heat flux (K*kg/(m*s**2))
REAL :: dqvsflx(nx,ny) ! Surface moisture flux (kg/(m**2*s))
REAL :: tem1 (nx,ny,nz) ! A work array
INTEGER :: ireturn, i,j,k
!
!-----------------------------------------------------------------------
!
! Misc. local variables
!
!-----------------------------------------------------------------------
!
INTEGER :: is,js,ks,ie,je,ke
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
is=1
js=1
ks=1
ie=nx-1
je=ny-1
ke=nz-1
!-----------------------------------------------------------------------
!
! Scalars
!
!-----------------------------------------------------------------------
DO k=1,nz
DO j=1,ny
DO i=1,nx
tem1(i,j,k)=0.0
END DO
END DO
END DO
PRINT *, ' ptprt: '
CALL subtr(nx,ny,nz, ptprt,ptbar,aptprt,aptbar,dptprt, &
is,js,ks,ie,je,ke)
PRINT *, ' pprt: '
CALL subtr(nx,ny,nz, pprt, pbar, apprt, apbar, dpprt, &
is,js,ks,ie,je,ke)
PRINT *, ' qvprt: '
CALL subtr(nx,ny,nz, qvprt,qvbar,aqvprt,aqvbar,dqvprt, &
is,js,ks,ie,je,ke)
PRINT *, ' qc: '
CALL subtr(nx,ny,nz, qc, tem1, aqc, tem1, dqc, &
is,js,ks,ie,je,ke)
PRINT *, ' qr: '
CALL subtr(nx,ny,nz, qr, tem1, aqr, tem1, dqr, &
is,js,ks,ie,je,ke)
PRINT *, ' qi: '
CALL subtr(nx,ny,nz, qi, tem1, aqi, tem1, dqi, &
is,js,ks,ie,je,ke)
PRINT *, ' qs: '
CALL subtr(nx,ny,nz, qs, tem1, aqs, tem1, dqs, &
is,js,ks,ie,je,ke)
PRINT *, ' qh: '
CALL subtr(nx,ny,nz, qh, tem1, aqh, tem1, dqh, &
is,js,ks,ie,je,ke)
PRINT *, ' tke: '
CALL subtr(nx,ny,nz, tke, tem1, atke, tem1, dtke, &
is,js,ks,ie,je,ke)
PRINT *, ' kmh: '
CALL subtr(nx,ny,nz, kmh, tem1, akmh, tem1, dkmh, &
is,js,ks,ie,je,ke)
PRINT *, ' kmv: '
CALL subtr(nx,ny,nz, kmv, tem1, akmv, tem1, dkmv, &
is,js,ks,ie,je,ke)
!-----------------------------------------------------------------------
!
! u wind components
!
!-----------------------------------------------------------------------
ie=nx
PRINT *, ' uprt: '
CALL subtr(nx,ny,nz,uprt,ubar,auprt,aubar,duprt, &
is,js,ks,ie,je,ke)
!-----------------------------------------------------------------------
!
! v wind components
!
!-----------------------------------------------------------------------
ie=nx-1
je=ny
PRINT *, ' vprt: '
CALL subtr(nx,ny,nz,vprt,vbar,avprt,avbar,dvprt, &
is,js,ks,ie,je,ke)
!-----------------------------------------------------------------------
!
! w wind components
!
!-----------------------------------------------------------------------
je=ny-1
ke=nz
PRINT *, ' wprt: '
CALL subtr(nx,ny,nz,wprt,tem1,awprt,tem1,dwprt, &
is,js,ks,ie,je,ke)
!-----------------------------------------------------------------------
!
! 2-d surface (soil) variables
!
!-----------------------------------------------------------------------
ie=nx-1
je=ny-1
ks=1
ke=1
!
PRINT *, ' tsfc:'
CALL subtr(nx,ny,1, tsfc,tem1, atsfc,tem1, dtsfc, &
is,js,ks,ie,je,ke)
PRINT *, ' tsoil:'
CALL subtr(nx,ny,1, tsoil,tem1, atsoil,tem1, dtsoil, &
is,js,ks,ie,je,ke)
PRINT *, ' wetsfc:'
CALL subtr(nx,ny,1, wetsfc,tem1, awetsfc,tem1, dwetsfc, &
is,js,ks,ie,je,ke)
PRINT *, ' wetdp:'
CALL subtr(nx,ny,1, wetdp,tem1, awetdp,tem1, dwetdp, &
is,js,ks,ie,je,ke)
PRINT *, ' wetcanp:'
CALL subtr(nx,ny,1,wetcanp,tem1,awetcanp,tem1,dwetcanp, &
is,js,ks,ie,je,ke)
PRINT *, ' raing:'
CALL subtr(nx,ny,1, raing,tem1, araing,tem1, draing, &
is,js,ks,ie,je,ke)
PRINT *, ' rainc:'
CALL subtr(nx,ny,1, rainc,tem1, arainc,tem1, drainc, &
is,js,ks,ie,je,ke)
PRINT *, ' prcrate1:'
CALL subtr(nx,ny,1, prcrate(1,1,1),tem1, aprcrate(1,1,1),tem1, &
dprcrate(1,1,1), is,js,ks,ie,je,ke)
PRINT *, ' prcrate2:'
CALL subtr(nx,ny,1, prcrate(1,1,2),tem1, aprcrate(1,1,2),tem1, &
dprcrate(1,1,2), is,js,ks,ie,je,ke)
PRINT *, ' prcrate3:'
CALL subtr(nx,ny,1, prcrate(1,1,3),tem1, aprcrate(1,1,3),tem1, &
dprcrate(1,1,3), is,js,ks,ie,je,ke)
PRINT *, ' prcrate4:'
CALL subtr(nx,ny,1, prcrate(1,1,4),tem1, aprcrate(1,1,4),tem1, &
dprcrate(1,1,4), is,js,ks,ie,je,ke)
PRINT *, ' radfrc:'
CALL subtr(nx,ny,nz, radfrc,tem1, aradfrc,tem1, &
dradfrc, is,js,ks,ie,je,ke)
PRINT *, ' radsw:'
CALL subtr(nx,ny,1, radsw,tem1, aradsw,tem1, &
dradsw, is,js,ks,ie,je,ke)
PRINT *, ' rnflx:'
CALL subtr(nx,ny,1, rnflx,tem1, arnflx,tem1, &
drnflx, is,js,ks,ie,je,ke)
RETURN
END SUBROUTINE diffield
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE SUBTR ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE subtr(nx,ny,nz, a,abar,b,bbar,c, & 28
istr,jstr,kstr,iend,jend,kend)
!
!-----------------------------------------------------------------------
!
! PURPOSE:
!
! Subtracts 2 three-dimensional arrays, represented by
! means plus perturbations.
!
! AUTHOR: Keith Brewster OU School of Meteorology. Feb 1992
!
! MODIFICATION HISTORY:
! 11 Aug 1992 (KB) changed from arps2.5 to arps3.0
!
! 7 May 2002 (Eric Kemp)
! Minor change to list all non-zero differences.
!
!-----------------------------------------------------------------------
!
! INPUT:
! a perturbation data array
! abar mean data array
! b perturbation data array to subtract from a
! bbar mean data array to subtract from a
!
! OUTPUT:
! c difference array a-b
! (may share storage in calling program with array a or b)
!
!-----------------------------------------------------------------------
!
! Variable Declarations:
!
!-----------------------------------------------------------------------
!
IMPLICIT NONE
INTEGER :: nx,ny,nz ! 3 dimensions of array
REAL :: a (nx,ny,nz) ! data array
REAL :: abar(nx,ny,nz) ! base state of data array a
REAL :: b (nx,ny,nz) ! data array to subtract from a
REAL :: bbar(nx,ny,nz) ! base state of data arrya b
REAL :: c (nx,ny,nz) ! difference array a-b
INTEGER :: istr,jstr,kstr
INTEGER :: iend,jend,kend
INTEGER :: i,j,k,imid,jmid,kmid
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
imid=nint(0.5*FLOAT(istr+iend))
jmid=nint(0.5*FLOAT(jstr+jend))
kmid=nint(0.5*FLOAT(kstr+kend))
!
!-----------------------------------------------------------------------
!
! Tell us about a sample input point
!
!-----------------------------------------------------------------------
!
PRINT *, ' sample, a= ',(a(imid,jmid,kmid)+abar(imid,jmid,kmid)), &
' b= ',(b(imid,jmid,kmid)+bbar(imid,jmid,kmid))
!
!-----------------------------------------------------------------------
!
! Subtraction
!
!-----------------------------------------------------------------------
!
DO k=kstr,kend
DO j=jstr,jend
DO i=istr,iend
c(i,j,k)=a(i,j,k)+abar(i,j,k)-(b(i,j,k)+bbar(i,j,k))
IF (c(i,j,k) /= 0) THEN
WRITE(6,*)'Non-zero difference in field! c = ',c(i,j,k), &
' at i,j,k: ',i,j,k
END IF
END DO
END DO
END DO
!
!-----------------------------------------------------------------------
!
! Tell us about a sample output point
!
!-----------------------------------------------------------------------
!
PRINT *, ' c= ',c(imid,jmid,kmid)
RETURN
END SUBROUTINE subtr
!
!##################################################################
!##################################################################
!###### ######
!###### SUBROUTINE INTSCLRS ######
!###### ######
!###### Developed by ######
!###### Center for Analysis and Prediction of Storms ######
!###### University of Oklahoma ######
!###### ######
!##################################################################
!##################################################################
!
SUBROUTINE intsclrs(nx,ny,nz,vnx,vny,vnz, & 1,34
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
iorder, &
xs2d,ys2d,zps, vxs,vys,vzps, &
vptprt, vpprt, &
vqvprt, vqc, vqr, vqi, vqs, vqh, vtke,vkmh,vkmv, &
vptbar, vpbar, vrhobar, vqvbar, &
vtsfc,vtsoil,vwetsfc,vwetdp,vwetcanp, &
vraing,vrainc,vprcrate, &
vradfrc,vradsw,vrnflx, &
vusflx,vvsflx,vptsflx,vqvsflx, &
aptprt, apprt, &
aqvprt, aqc, aqr, aqi, aqs, aqh, atke,akmh,akmv, &
aptbar, apbar, arhobar, aqvbar, &
atsfc,atsoil,awetsfc,awetdp,awetcanp, &
araing,arainc,aprcrate, &
aradfrc,aradsw,arnflx, &
ausflx,avsflx,aptsflx,aqvsflx, &
iloc,jloc,zpver,dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
ireturn )
!
!-----------------------------------------------------------------------
!
! PURPOSE:
! Intfield interpolates scalars from a set of fields (the verification
! fields, "verif") having Cartesian coordinates described by vx,vy,vzp
! to a second set of fields described by cartesion coordinates x,y,zp.
! It is assumed that x,y,zp and vx,vy,vzp are monotonically increasing
! with increasing index.
!
!-----------------------------------------------------------------------
!
! AUTHOR: Keith Brewster OU School of Meteorology. Feb 1992
!
! MODIFICATION HISTORY:
! 12 Aug 1992 (KB) changed from arps2.5 to arps3.0
! 19 May 1993 (KB) changed from arps3.1 to arps3.2
! 24 May 1993 (KB) changed to special version for scalars only.
!
! 9 Sep 1995 (KB) added processing of sfc (soil) fields
! 26 Apr 1996 (KB) Version 2.0 -- Uses Gauss Forward routines for
! interpolation rather than piecewise linear.
! 07 Nov 1996 (KB) Replaced interpolation scheme.
! Reordered sequence of variables in call.
! 03 Nov 1999 (KB via Eric Kemp) Corrected dimensions of precip
! and flux v* (verif) variables that had been
! recently added.
!
!-----------------------------------------------------------------------
!
! INPUT:
! nx Number of grid pts in the x-direction (east/west)
! ny Number of grid pts in the y-direction (north/south)
! nz Number of grid pts in the vertical
!
! vnx Number of verif grid points in the x-direction (east/west)
! vny Number of verif grid points in the y-direction (north/south)
! vnz Number of verif grid points in the vertical
!
! ibeg,iend Range of x index to do interpolation
! jbeg,jend Range of y index to do interpolation
! kbeg,kend Range of z index to do interpolation
!
! ivbeg,ivend Range of x index to use in verification array
! jvbeg,jvend Range of y index to use in verification array
! kvbeg,kvend Range of z index to use in verification array
!
! iorder Interpolation parameter.
! iorder specifies the order of interpolation
! 1 = bi-linear
! 2 = bi-quadratic
!
! xs2d x coordinate of scalar grid points in physical space (m)
! ys2d y coordinate of scalar grid points in physical space (m)
! zps z coordinate of scalar grid points in physical space (m)
!
! vxs x coordinate of verif scalar grid points in physical space (m)
! vys y coordinate of verif scalar grid points in physical space (m)
! vzps z coordinate of verif scalar grid points in physical space (m)
!
! vpt Potential temperature
! vpprt Perturbation pressure (Pascal)
! vqv Water vapor specific humidity (kg/kg)
! vqc Cloud water mixing ratio (kg/kg)
! vqr Rainwater mixing ratio (kg/kg)
! vqi Cloud ice mixing ratio (kg/kg)
! vqs Snow mixing ratio (kg/kg)
! vqh Hail mixing ratio (kg/kg)
!
! vptbar Base state potential temperature (K)
! vpbar Base state pressure (Pascal)
! vrhobar Base state density (kg/m**3)
! vqvbar Base state water vapor mixing ratio (kg/kg)
!
! vtsfc Temperature at surface (K)
! vtsoil Deep soil temperature (K)
! vwetsfc Surface soil moisture
! vwetdp Deep soil moisture
! vwetcanp Canopy water amount
!
! vraing Grid supersaturation rain
! vrainc Cumulus convective rain
! vprcrate Precipitation rates
!
! vradfrc Radiation forcing (K/s)
! vradsw Solar radiation reaching the surface
! vrnflx Net radiation flux absorbed by surface
!
! vusflx Surface flux of u-momentum (kg/(m*s**2))
! vvsflx Surface flux of v-momentum (kg/(m*s**2))
! vptsflx Surface heat flux (K*kg/(m**2 * s ))
! vqvsflx Surface moisture flux of (kg/(m**2 * s))
!
! OUTPUT:
! apt Interpolated potential temperature
! apprt Interpolated perturbation pressure (Pascal)
! aqv Interpolated water vapor specific humidity (kg/kg)
! aqc Interpolated cloud water mixing ratio (kg/kg)
! aqr Interpolated rainwater mixing ratio (kg/kg)
! aqi Interpolated cloud ice mixing ratio (kg/kg)
! aqs Interpolated snow mixing ratio (kg/kg)
! aqh Interpolated hail mixing ratio (kg/kg)
!
! aptbar Interpolated base state potential temperature (K)
! apbar Interpolated base state pressure (Pascal)
! arhobar Interpolated base state density (kg/m**3)
! aqvbar Interpolated base state water vapor mixing ratio (kg/kg)
!
! atsfc Interpolated temperature at surface (K)
! atsoil Interpolated deep soil temperature (K)
! awetsfc Interpolated surface soil moisture
! awetdp Interpolated deep soil moisture
! awetcanp Interpolated canopy water amount
!
! araing Interpolated grid supersaturation rain
! arainc Interpolated cumulus convective rain
! aprcrate Precipitation rates
!
! aradfrc Radiation forcing (K/s)
! aradsw Solar radiation reaching the surface
! arnflx Net radiation flux absorbed by surface
!
! ausflx Surface flux of u-momentum (kg/(m*s**2))
! avsflx Surface flux of v-momentum (kg/(m*s**2))
! aptsflx Surface heat flux (K*kg/(m**2 * s ))
! aqvsflx Surface moisture flux of (kg/(m**2 * s))
!
! ireturn
!
! WORK ARRAYS:
!
! iloc i-index of interpolation points in field to be interpolated
! jloc j-index of interpolation points in field to be interpolated
! dxfld Vector of delta-x (m) of field to be interpolated
! dyfld Vector of delta-y (m) of field to be interpolated
! rdxfld Vector of 1./delta-x (1/m) of field to be interpolated
! rdyfld Vector of 1./delta-y (1/m) of field to be interpolated
!
! slopey Piecewise linear df/dy
! alphay Coefficient of y-squared term in y quadratic interpolator
! betay Coefficient of y term in y quadratic interpolator
!
!-----------------------------------------------------------------------
!
! Variable Declarations:
!
!-----------------------------------------------------------------------
!
IMPLICIT NONE
INTEGER :: nx,ny,nz
INTEGER :: vnx,vny,vnz
INTEGER :: ibeg,iend,jbeg,jend,kbeg,kend
INTEGER :: ivbeg,ivend,jvbeg,jvend,kvbeg,kvend
!
REAL :: xs2d(nx,ny)
REAL :: ys2d(nx,ny)
REAL :: zps(nx,ny,nz)
!
REAL :: vxs(vnx)
REAL :: vys(vny)
REAL :: vzps(vnx,vny,vnz)
!
INTEGER :: iorder
!
!-----------------------------------------------------------------------
!
! Original arrays (verification field)
!
!-----------------------------------------------------------------------
!
REAL :: vptprt(vnx,vny,vnz)
REAL :: vpprt (vnx,vny,vnz)
REAL :: vqvprt(vnx,vny,vnz)
REAL :: vqc (vnx,vny,vnz)
REAL :: vqr (vnx,vny,vnz)
REAL :: vqi (vnx,vny,vnz)
REAL :: vqs (vnx,vny,vnz)
REAL :: vqh (vnx,vny,vnz)
REAL :: vtke (vnx,vny,vnz)
REAL :: vkmh (vnx,vny,vnz)
REAL :: vkmv (vnx,vny,vnz)
REAL :: vptbar (vnx,vny,vnz)
REAL :: vrhobar(vnx,vny,vnz)
REAL :: vpbar (vnx,vny,vnz)
REAL :: vqvbar (vnx,vny,vnz)
REAL :: vtsfc (vnx,vny) ! Temperature at surface (K)
REAL :: vtsoil (vnx,vny) ! Deep soil temperature (K)
REAL :: vwetsfc(vnx,vny) ! Surface soil moisture
REAL :: vwetdp (vnx,vny) ! Deep soil moisture
REAL :: vwetcanp(vnx,vny) ! Canopy water amount
REAL :: vraing (vnx,vny) ! Grid supersaturation rain
REAL :: vrainc (vnx,vny) ! Cumulus convective rain
REAL :: vprcrate(vnx,vny,4) ! precipitation rates (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL :: vradfrc(vnx,vny,vnz) ! Radiation forcing (K/s)
REAL :: vradsw (vnx,vny) ! Solar radiation reaching the surface
REAL :: vrnflx (vnx,vny) ! Net radiation flux absorbed by surface
REAL :: vusflx (vnx,vny) ! Surface flux of u-momentum (kg/(m*s**2))
REAL :: vvsflx (vnx,vny) ! Surface flux of v-momentum (kg/(m*s**2))
REAL :: vptsflx(vnx,vny) ! Surface heat flux (K*kg/(m*s**2))
REAL :: vqvsflx(vnx,vny) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Arrays interpolated to model grid
!
!-----------------------------------------------------------------------
!
REAL :: aptprt(nx,ny,nz)
REAL :: apprt (nx,ny,nz)
REAL :: aqvprt(nx,ny,nz)
REAL :: aqc (nx,ny,nz)
REAL :: aqr (nx,ny,nz)
REAL :: aqi (nx,ny,nz)
REAL :: aqs (nx,ny,nz)
REAL :: aqh (nx,ny,nz)
REAL :: atke (nx,ny,nz)
REAL :: akmh (nx,ny,nz)
REAL :: akmv (nx,ny,nz)
REAL :: aptbar (nx,ny,nz)
REAL :: arhobar(nx,ny,nz)
REAL :: apbar (nx,ny,nz)
REAL :: aqvbar (nx,ny,nz)
REAL :: atsfc (nx,ny) ! Temperature at surface (K)
REAL :: atsoil (nx,ny) ! Deep soil temperature (K)
REAL :: awetsfc(nx,ny) ! Surface soil moisture
REAL :: awetdp (nx,ny) ! Deep soil moisture
REAL :: awetcanp(nx,ny) ! Canopy water amount
REAL :: araing (nx,ny) ! Grid supersaturation rain
REAL :: arainc (nx,ny) ! Cumulus convective rain
REAL :: aprcrate(nx,ny,4) ! precipitation rate (kg/(m**2*s))
! prcrate(1,1,1) = total precip. rate
! prcrate(1,1,2) = grid scale precip. rate
! prcrate(1,1,3) = cumulus precip. rate
! prcrate(1,1,4) = microphysics precip. rate
REAL :: aradfrc(nx,ny,nz) ! Radiation forcing (K/s)
REAL :: aradsw (nx,ny) ! Solar radiation reaching the surface
REAL :: arnflx (nx,ny) ! Net radiation flux absorbed by surface
REAL :: ausflx (nx,ny) ! Surface flux of u-momentum (kg/(m*s**2))
REAL :: avsflx (nx,ny) ! Surface flux of v-momentum (kg/(m*s**2))
REAL :: aptsflx(nx,ny) ! Surface heat flux (K*kg/(m*s**2))
REAL :: aqvsflx(nx,ny) ! Surface moisture flux (kg/(m**2*s))
!
!-----------------------------------------------------------------------
!
! Work arrays
!
!-----------------------------------------------------------------------
!
INTEGER :: iloc(nx,ny)
INTEGER :: jloc(nx,ny)
REAL :: zpver(nx,ny,vnz)
!
REAL :: dxfld(vnx)
REAL :: dyfld(vny)
REAL :: rdxfld(vnx)
REAL :: rdyfld(vny)
REAL :: slopey(vnx,vny,vnz)
REAL :: alphay(vnx,vny,vnz)
REAL :: betay(vnx,vny,vnz)
!
INTEGER :: ireturn
!
!-----------------------------------------------------------------------
!
! Misc. local variables
!
!-----------------------------------------------------------------------
!
INTEGER :: k,korder
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
! Beginning of executable code...
!
!@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
!
!-----------------------------------------------------------------------
!
! Find i,j indices in verfication grid of each forecast point
!
!-----------------------------------------------------------------------
!
CALL setijloc(nx,ny,vnx,vny,xs2d,ys2d,vxs,vys,iloc,jloc)
CALL setdxdy(vnx,vny, &
1,vnx-1,1,vny-1, &
vxs,vys,dxfld,dyfld,rdxfld,rdyfld)
!
!-----------------------------------------------------------------------
!
! Interpolate 2-d fields
!
!-----------------------------------------------------------------------
!
korder=MIN(iorder,2)
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vtsfc,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
atsfc)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vtsoil,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
atsoil)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vwetdp,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
awetdp)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vwetsfc,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
awetsfc)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vwetcanp,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
awetcanp)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vraing,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
araing)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vrainc,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
arainc)
!
DO k=1,4
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vprcrate(1,1,k), &
vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aprcrate(1,1,k))
END DO
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vradsw,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aradsw)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vrnflx,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
arnflx)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vusflx,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
ausflx)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vvsflx,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
avsflx)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vptsflx,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aptsflx)
!
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vqvsflx,vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqvsflx)
!
!-----------------------------------------------------------------------
!
! Create array of verification heights at
! forecast x,y locations
!
!-----------------------------------------------------------------------
!
DO k=1,nz-1
CALL fldint2d(nx,ny,vnx,vny, &
ibeg,iend,jbeg,jend, &
ivbeg,ivend,jvbeg,jvend, &
korder,xs2d,ys2d,vzps(1,1,k),vxs,vys,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
zpver(1,1,k))
END DO
!
!-----------------------------------------------------------------------
!
! Interpolate 3d scalar fields
!
!-----------------------------------------------------------------------
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vptprt, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aptprt)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vpprt, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
apprt)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqvprt, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqvprt)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqc, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqc)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqr, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqr)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqi, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqi)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqs, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqs)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqh, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqh)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqi, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqi)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vtke, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
atke)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vkmh, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
akmh)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vkmv, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
akmv)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vptbar, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aptbar)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vpbar, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
apbar)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vrhobar, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
arhobar)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vqvbar, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aqvbar)
!
CALL fldint3d(nx,ny,nz,vnx,vny,vnz, &
ibeg,iend,jbeg,jend,kbeg,kend, &
ivbeg,ivend,jvbeg,jvend,kvbeg,kvend, &
korder,xs2d,ys2d,zps,vradfrc, &
vxs,vys,zpver,iloc,jloc, &
dxfld,dyfld,rdxfld,rdyfld, &
slopey,alphay,betay, &
aradfrc)
!
RETURN
END SUBROUTINE intsclrs